Effect of packed structure on flow behaviour in a trickle bed biofilter

The effects of operation conditions on the flow behaviour in gas–liquid countercurrent trickle bed biofilter were experimentally examined. In order to prevent gas channelling in the biofilter, packings with a relatively large void fraction, which have a role to maintain a high void fraction in the bed, were added. The gas and liquid velocities of the packed structure and the packings were changed, and the residence time distributions (RTDs) of the gas and liquid were measured. It was found that the addition of void supporters was very effective in the suppression of gas channelling.     

Lipid components,fatty acid distributions of triacylglycerols and phospholipids in rice brans

Endogenous tocochromanols in extracted lipids from rice brans of the five cultivars were determined by high-performance liquid chromatography, and were investigated in relation to the fatty acid (FA) distribution of triacylglycerols (TAG) and phospholipids (PL). The dominant tocols were α-tocopherol and γ-tocotrienol, followed by α-tocotrienol and with much smaller amounts of γ-tocopherol and δ-tocotrienol. The lipids of these rice brans comprised mainly TAG (80.6–86.0 wt.%), free FA (4.2–9.0 wt.%), and phospholipids (5.5–6.7 wt.%), whilst other components were also detected in minor proportions (0.2–2.1 wt.%). The PL components included phosphatidyl choline (31.8–46.8 wt.%), phosphatidyl ethanolamine (25.0–38.9 wt.%) and phosphatidyl inositol (20.2–23.2 wt.%). Comparison of these different cultivars showed, with a few exceptions, no significant differences (P > 0.05) in FA distribution. FA distribution of TAG among the five cultivars was evident in the rice brans: unsaturated FA were predominantly concentrated at the sn-2 position and saturated FA primarily occupying the sn-1 or sn-3 position. These results suggest that the tocopherol content, lipid component, and FA distribution in rice brans are not dependent on the cultivation areas during the growing season.     

Superhydrophobic/superhydrophilic micropatterning on a carbon nanotube film using a laser plasma-type hyperthermal atom beam facility

Superhydrophobic/superhydrophilic micropatterning on a carbon nanotube (CNT) film has been achieved using a laser plasma-type hyperthermal atom beam facility, which produces a small amount of damage and generates a highly anisotropic beam. Fluorination and oxidation on CNT films by exposure to fluorine-atom and oxygen-atom beams caused superhydrophobic and superhydrophilic surfaces, respectively, while maintaining the as-grown fibrous forms of the CNT films. Micropatterned oxidation on CNT films without using photoresists created superhydrophilic microdots and microchannels.     

Evaluation of the reduction in CO2 emissions by applying Micro‐Grid to home energy supply system

Dispersed generators such as wind power systems, photovoltaic systems, and cogeneration systems are expected to mitigate the environmental burden of energy consumption, and their installation has been promoted recently. Micro‐Grid is focused on as a method to solve some problems in a commercial electric power line when installing a large number of dispersed generators, and some demonstrative research on Micro‐Grid for large‐scale systems is being carried out now. Also, small cogeneration systems for houses, such as gas engines and fuel cells, are expected to improve CO₂ emissions. However, if the power and heat demand of a family are relatively small or are unbalanced, the cogeneration system does not operate effectively. The authors have studied the application of Micro‐Grid for home energy supply, and have developed a control system to solve this problem. The system achieves a reduction of CO₂ emissions and energy costs by sharing electric power and heat among some houses with cogeneration systems. This paper presents an outline of the newly developed system, and in particular describes the effect of the reduction in CO₂ emissions compared with a conventional energy supply method, and the case in which dispersed generators are installed in some houses and operate independently. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 170(3): 19–27, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20879     

Effects of Fruiting Bodies of Basidiomycetes on Yeast Growth Rates

The effects of edible fruiting of Basidiomycetes on growth of Saccharomyces cerevisiae and other yeast strains were examined. The growth rates were significantly increased in the presence of fruiting bodies but there was no significant difference growth yield between cultures with and without fruiting bodies. Growth rates of yeast cells were promoted in both synthetic and natural media.     

Speed-up of computing time for numerical analysis of particle charging process by using discrete element method

The objective of this paper is to improve the computing time for numerical analysis of particle charging process by using discrete element method. The rule for ignoring the calculations of contact forces and updating trajectories of unmoved particles were discussed. When the relative displacement of a particle within certain calculation steps became less than 0.1% of particle radius, this particle was determined to be unmoved and the calculations of this particle were ignored. The computing time was improved significantly when this new method was used, and its calculation speed was more than two times faster than that of original. It was found that this speed-up method is more useful for the cases that the particle becomes unmoved in short time or the height of charged bed is large. The simulation of charging process in an industrial-scale surge hopper was studied by using new method, the calculation speed became 2.88 times faster than that of original, and the quite similar particle size segregation between original and new methods was given. This new method for speed-up of the charging process in DEM is very useful, and the charging processes of the industrial scale storages can be simulated by using this method.     

Geometrical indications of adsorbed hydrogen atoms on graphite producing star and ellipsoidal like features in scanning tunneling microscopy images: Ab initio study

Recent scanning tunneling microscopy (STM) experiments display images with star and ellipsoidal like features resulting from unique geometrical arrangements of a few adsorbed hydrogen atoms on graphite. Based on first-principles STM simulations, we have found that the model with three hydrogen atoms, in which the hydrogen atoms are symmetrically placed on the graphene sheet in an equilateral triangle, encompassing a complete hexagon ring of carbon atoms, reproduces the experimentally observed starlike STM patterns. Additionally, we confirm that an ortho-hydrogen pair is the configuration corresponding to the ellipsoidal images. These calculations reveal that when the hydrogen pairs are in the same orientation, they are energetically more stable.